ToughSonic 30 Ultrasonic Sensor

Product Overview

Product Datasheet

toughsonic-30
[]

The Toughsonic 30' Ultrasonic Sensors measure level and distance through the air using ultrasonic sound waves. They provide fast, reliable non-contact measurements at distances up to 30 feet, with an optimum range of 10" to 20 feet. These sensors come standard with 316 stainless steel housings, ruggedized piezoelectric ultrasonic transducers, epoxy potting, rear status indicators, and a permanently attached 2 meter cable. They are rugged and IP68 immersion-rated for use indoors and out. 

  • Maximum Range: 30 feet (9.1 m)
  • Optimum Range:  10" inches - 20 feet
  • Housing: 316 Stainless Steel
  • Mounting: 1.5" NPT Threads (Adapters available)
  • Outputs: 5 + serial data
  • Operating Temperature: -40 to +158°F (-40 to +70°C)
Regular Price $625.00 Special Price $562.50
Regular Price $625.00 Special Price $562.50

The Toughsonic 30' Ultrasonic Sensors measure level and distance through the air using ultrasonic sound waves. They provide fast, reliable non-contact measurements at distances up to 30 feet, with an optimum range of 10" to 20 feet. These sensors come standard with 316 stainless steel housings, ruggedized piezoelectric ultrasonic transducers, epoxy potting, rear status indicators, and a permanently attached 2 meter cable. They are rugged and IP68 immersion-rated for use indoors and out. 

  • Maximum Range: 30 feet (9.1 m)
  • Optimum Range:  10" inches - 20 feet
  • Housing: 316 Stainless Steel
  • Mounting: 1.5" NPT Threads (Adapters available)
  • Outputs: 5 + serial data
  • Operating Temperature: -40 to +158°F (-40 to +70°C

Our WhitmanVIEW Sensor Software (DOWNLOAD) is included at no extra charge, runs on a windows PC and connects to sensors via a serial data port. Our Setup Kits provide everything needed to connect through a USB port, including power supply, sensor-PC interface and cables. WhitmanVIEW is not required but adds powerful configuration, test and management capability.

  • View sensor measurements graphically in several different ways
  • Over 60 user-adjustable parameters
  • Built-in data logging, graphing, exporting and statistics facilities
  • Save & retrieve setups for maintenance and sensor cloning

For more information, visit our technical resources page.

Several sensor options are available including our CHEM line for use in corrosive liquids and gasses. 

More Information
Is OEM Replacement Part?No
Max Range30 feet (9.1m)
Optimum Range10 inches - 20 feet (25.4 cm- 6.1m)
Temperature Range-40 to 158°F (-40 to 70°C)
Humidity0 to 100% Operating
ProtectionNEMA-4X, NEMA-6P, IP68
TransducerRuggedized piezoelectric
CompensationTemperature compensated
ResolutionDigital: 0.0068 in. (0.172mm); Analog 4099 steps (0-10VDC), 3279 steps (4-20mA)
RepeatabilityNominal 0.2% of range @ constant temp. Affected by target, distance, environment
Update Rate10 Hz (100 ms), Adjustable, affected by software filter selections
Mounting Type1.5 inch NPT thread, top or bottom
Attached Cable6.5 Feet (2 meters) Standard, other lengths available
Voltage Output0-10, 0-5 VDC or PC customized; 10 mA max
Current LoopCurrent sourcing 4-20 mA or PC customized, max loop 450Ω
Current Loop 2Current sinking 4-20 mA or PC customized, max loop 450Ω
Sinking Switch150 mA max @ 40 VDC max, teachable set point & polarity, fault indication
Sourcing Switch150 mA max @ input voltage, teachable set point & polarity, fault indication
RS-232, RS-485Modbus protocol, 9600-115200 baud (selectable), 8 data bits, 1 stop, no parity
SYNC FeaturePermits up to 32 sensors to operate in close proximity without interaction

No Related Posts

    Sorry, we haven't added a 3D view for this item yet.

    We’re Here To Help.

    Get Support