P100V High Accuracy Low Vacuum Vacuum Switch

Product Overview

Product Datasheet

P100V-1-K12T
[]

The P100V High Accuracy Low Vacuum Environment Vacuum switches are ideal in low vacuum applications where precision of setpoint must be high and repeatability low. These switches are com¬monly used in natural gas well heads, natural gas generator sets, and air applications like forced draft blowers. The P100V can be used both in dry indoor applications or within an enclosure.

  • Set Point Range: 5.4 to 150.0 Inches of Water (0.40 to 11.0 InHg) 
  • Max System Pressure: 149.5 Inches of Water (11.0 InHg)
  • Temperature range: -65°F to +190°F (-54°C to +88°C)
Custom / 2 - 4 Weeks
$114.00
$114.00

The Whitman Controls P100V High Accuracy Low Vacuum Environment Vacuum switches are ideal in low vacuum applications where precision of setpoint must be high and repeatability low. These switches are com¬monly used in natural gas well heads, natural gas generator sets, and air applications like forced draft blowers. The P100V can be used both in dry indoor applications or within an enclosure.

Key Features:

  • Highly accurate setpoints with low repeatability
  • Set point options: Factory set, field adjustable, or a combination
  • Extensive operating temperature range
  • Wide range of electrical interfaces available
  • SPDT or SPST availability

Specifications:

  • Set point range: 5.4 to 150.0 Inches of Water (0.40 to 11.0 InHg) 
  • Max system vacuum: 149.5 Inches of Water (11.0 InHg)
  • Temperature range: -65°F to +190°F (-54°C to +88°C)
  • Amps: 5 Amps Max
  • Sensor Element: Diaphragm
  • Weight: 7.8 oz (varies slightly with electrical interface selection)
  • Cycling: Not to exceed 100 CPM
  • Wetted Parts:
    Diaphragm: Buna N with 316
    stainless steel reinforcing
    Seal: Loctite #271
    Body: Anodized aluminum
    Standard Thread: ⅛-27 NPT male
More Information
Switch ApplicationInches of Water P100V (5"-150" H20)
Is OEM Replacement Part?No
Switch AvailabilityCustom / 2 - 4 Weeks
Set Point Range: In Hg Vacuum6 to 150 in Water Vac
Set Point Options SPDT Factory Set - Adjustable
Maximum Amperage and Voltage1 Amp 125 VAC Gold
Electrical InterfaceT - Solder Terminals
Maximum System Pressure15 PSIG/11 In HG
Fitting1/8" NPT Male
Corrosive MediaNo
Wet/Dry/SubmergedStandard (Dry use)
Electrical Interface Options Spec SheetInterface-v1-1-Flat.pdf
Wetted MaterialsZinc Alloy & Buna
Additional OptionsMany Options are Available. If its not here, call us.
Standard Fitting Size1/8"NPT
Shipping Weight Ounces11 ozs

No Related Posts

Sorry, we haven't added a 3D view for this item yet.

We’re Here To Help.

Get Support